Procedure for entry & exit in sterile area sterile area.

Procedure for entry & exit   in sterile area sterile area.

Precautions :

Among all the persons duly entered in sterile area, only

those whose names are laid down in the list are applicable for

this procedure.  Others are not permitted strictly.

Ensure about the overall cleanliness of change room.

Aware about the personal hygiene during all activities.

Do not touch any surfaces with hands.  Try to use elbow for pushing

the door during entry.

Do not make rapid movement.

Enter in to next change room only when the door of first one is closed.

Gowning procedure is strictly followed as per laid down sequence.

Try to Keep yourself inside the sterile area for half session of the work.

Avoid talking, if required use gestures preferably.

Entry Procedure :

Airlock – I

Open the door of Airlock – I and enter in to the Airlock – I

Take out your footwear meant for manufacturing premises and keep them on

the rack provided therein .

Remove the factory garments and keep it in the cupboard.

Push the doors slowly and take entry in air lock –II.

Airlock – II

Disinfect your hands with filtered 70% IPA.

Pick up a set of sterilized garments from cupboard having

Do the gowning strictly as per laid down sequence as mentioned below. While gowning the sterile dress should not touch to the floor.

Headgear      

Boiler suit (single piece)

Booties

footwear

Look at mirror for tidiness and neatness and then only enter in third air lock

by opening the door gently with the help of elbow. 

Airlock – III

In third air lock, disinfect your hands with filtered 70% IPA.

Pick up a set of sterile hand gloves and wear it properly.

Disinfect the hands again with filtered 70% IPA. Allow to dry.

Enter in sterile corridor by pushing the door with elbow.

Disburse according to your work allotment in sterile area of manufacturing premises.

Exit Procedure: 

Airlock – IV

   After completion of the job, open the door of fourth air lock and enter in           

Airlock – IV.

    Remove the used sterile garments as laid down sequence.

Hand gloves

Foot wear

Booties

Boiler suit

Head gear

and put them in the bag and discard the set of dress in the “Used Linen           

Bin” provided in fourth air lock.

 Open the door of 1^St air lock and enter in it.  Put on the factory garments and foot wears.

Open the door of corridor and come out in non sterile corridor.